Catalogue
Shop by Brand
Shop by Price
9903 Triumph Rear Suspension Hagon Shock E2113-10mm-set J48
  Zoom

9903 Triumph Rear Suspension Hagon Shock E2113-10mm-set J48

Our Price:  £28.20 

Availability:  

  

In stock, immediate despatch

+

Model:  J48
Part Number:  E2113-10mm-set
Brand:  Motalia



Triumph Unit and Pre Unit rear suspension bolts, nuts and washers in stainless steel. These bolts are 10mm dia x 29mm long, the length under the head is 2" with 0.520" A/F Heads the same size as the originals. The shanks are 10mm diameter but with the standard 3/8" cycle thread. They have been made to allow you to fit the Hagon Shocks that only come with a 10mm bushed eye; if you use the standard 3/8" bolts they will be loose in the eye and knock. To use these you will have to open out the outer hole in the support lug by about 0.020". Please check these fit your machine before ordering. Triumph part number E2113-10mm. There are another set E2113a-10mm which has 2 x 2" bolts and 2 x 1-34" bolts. The bolts have a slightly domed head and are the same spanner size and thread rate as the originals.

Please note all stainless parts MUST be assembled with copa slip (copper slip). Also listed on this site All British thread data can be viewed on our web site. Any queries please phone Motalia on 01953 789420 office hours. Made in England J48 x 4 + L/W x4 Pw x4 ncf38026ds-10mm x 4. nuts L13 E2113-10mm-set - J48

Be the first to Write a Review for this item!