0504 Triumph Pre Unit 6T Inlet Manifold Studs Stainless E2920-set

Triumph Pre Unit 6T carburettor stud set in stainless steel. This set will only fit the 6T. The triumph part numbers for these are E2920 for the four 1/4" studs and E1553 for the two 5/16". As a guide the 1/4 studs are cyc/cyc and the 5/16 whit/cyc. The threads and nut sizes are the same as originals.

The studs have slightly domed ends which can easily be polished to look great as they slightly protrude through the nuts. The nuts have a single sided chamfer and are machined back and front to leave a nicely machined finish, each side of the hexagon has been hand finished to leave a bright surface rather than the dull finish normally found on hex bar. All nuts are semi polished so they can easily be polished to a mirror finish or bead blasted to give that original cadmium look.

Please note all stainless parts MUST be assembled with copa slip (copper slip). Also available on this site.

All British thread data can be viewed on our web site. Any queries please phone Motalia on 01953 789420 office hours.

Made in England

K3-43 x 4 W1-11 x 2